85寸偏光片撕膜机 85寸液晶电视偏光修理机 液晶电视维修设备 修屏仪器

85寸偏光片撕膜机  85寸液晶电视偏光修理机 液晶电视修屏设备品牌:欧联设备详细名称:液晶屏维修设备-液晶偏光撕膜机型号:OL-SM85 设备用途:偏光片撕膜机是指各种液晶显示屏组装及返修过程中,将表面刮伤等不良品的液晶显示屏的偏光片行进剥离的工艺制程设备。尤其特适用于超薄、超大的液晶面板偏光片剥离工艺。产品规格:适用于85寸以内液晶面板作业 原理:偏光片撕膜机的工

  • 型号:

85寸偏光片撕膜机  85寸液晶电视偏光修理机 液晶电视修屏设备

LCD bonding machine|LCD repair machine|TV Repair machine|Mobile Phone Repair machine


品牌:欧联

设备详细名称:液晶屏维修设备-液晶偏光撕膜机

型号:OL-SM85

 

设备用途:偏光片撕膜机是指各种液晶显示屏组装及返修过程中,将表面刮伤等不良品的液晶显示屏的偏光片行进剥离的工艺制程设备。尤其特适用于超薄、超大的液晶面板偏光片剥离工艺。

产品规格:适用于85寸以内液晶面板作业

 

原理:偏光片撕膜机的工作原理是通过人工撕开约8-10cm对角开口处,利用粘胶缠引胶带固定于设备撕膜辊上。启动大功率变频电机。将液晶显示屏上偏光片剥离。

 

功能特点:

精选高精度同心滚齿钢轮同向力撕膜,具有不易打滑、不易脱齿、不易变超长无间隙特点。

采用九组同心同水平防静电混论组为辅助载台,大大减少了撕膜过程当中因非水平受力或移动阻力所产生的破损率。

设备工作过程中,配备大功率远距离防静电离子风机进行静电消除处理。

采用日本温度控制器四分隔预热,并内置PID温度自整定功能模块,能使速度控制更精准。

废料传送装置运用并采用日本控制系统、7寸人机界面控制。本设备参数及规格可根据客户要求进行定制及修改。

 

基本参数:

输入电源:AC220V  50-60HZ

额定功率: 2-6K

工作气压:0.4-0.8MPA

静电消除:离子风消除

剥离速度:软件可调

加热方式:恒温加热(四分区)

温度范围:RT-500℃可调

机身主材:高强度电源型铝

适用尺寸:85英寸以下(选订)

热电偶:K

操作模式:温度控制器

 

设备材质:主要构件为钢板,电泳型铝,铁、胶辊等等

设备描述:修屏仪器

设备包装:胶合木板木箱包装


LCD Polarizer Film Removing Machine refers to various kinds of LCD assembly and rework process, surface scratches and other defective products LCD polarizer film peel technology equipment. In particular, especially suitable for thin, large LCD panel Polaroid lift-off process.

 

Product Specifications:

Applicable to the 65-inch or less LCD panel operation.

Principle:

By manually removing about 8-10 cm diagonal openingsusing the viscose wrapped around the tape fixed to the device tear film roll. Start up high power frequency conversion motor. Let the LCD screen Polaroid peel.

Function Characteristics:

  • Selection of high precision concentric roll teethwith the same force tear film, it has easy to sliphigh precise concentric gear steel roller forremoving film, which can avoid skid, distortion clearance

  • Using nine concentric and same level anti-static asauxiliary stage, greatly reducing the tear film process of due tonon-horizontal force or moving resistance arising the breakage rate.

  • During equipment operation , equipped withhigh-power long-range anti-static ion fan electrostatic elimination

  • Using japan temperature controller four partitionspreheat, and built-in PID temperature self-tuning function modules, makespeed control more precise.

  • Waste transfer device use the japan control system7-inch man-machine interface control.

  • The device parameters and specifications can becustomized and modified according to customer requirements

Basic Parameters:

Input Power AC220V/50-60HZ

Rated power 2-6KW

Working pressure 0.4-0.8MPA

Static Elimination Ion wind Elimination

Peel speed Software adjustable

Heating Type Thermostat HeatingFour partitions

Temperature Range RT-500 (Adjustable)

Body main material Electrophoresis type aluminum of high-strength

Applicable size 65 inches or less

Thermocouple K type

Operating mode Temperature Controller

Material:

Steel, electrophoresis aluminum, iron, plastic, etc.